Things I made with air dry clay

This morning I showed some silicone molds I got, and a Martha Stewart Crafters Clay kit in this post.

These are the things I made. I definitely will be wanting more molds, and more white clay. It was fun and easy to work with, and I will be able to use the molds with my Fimo as well.

I didn't really like working with the colors. It takes a lot of practice to use two colors in a mold, and not have one color squish into the other, but I think I will practice more with using two colors in the cameo. I also don't like the pink and colored things I made as well as the white ones. I tried mica flakes, glitter and PearlEx in them, and I liked the Pearlex, but even though I used very small mica flakes, they were sort of big on the finished castings. The glitter wasn't bad.

Using colors would be okay if you don't care about seeing detail in your things, but I'd rather paint and shade mine after they are dry, so I can show how much detail they have.

I wish the detail showed up in this photo, but it is dark here before 4:00 now, so I had to use a flash and it washed everything out.

I do like the amount of detail in everything I made from all of the molds. I used parts of all of them, and they all worked well. I had to wait until they dried a bit to remove a few things from the molds, but the only one that I had to be really careful with was the kelp from the wilton mold. That one had a lot of really tiny branches on it, but I managed to get it out without too much trouble.

Using these molds and the clay was really fun, and I can't wait to see what they look like when I paint or shade them!

Air Dry Clay and Silicone Molds

My birthday is in a couple of weeks, and my mother wanted us to take her to AC Moore so she could get me some birthday presents.

While we were there, I decided to buy one of the Martha Stewart Craft Clay kits. The only one they had was the heirloom kit, but that's okay, because I really liked the molds that came with it.

I have been looking at these for a long time, but what made me decide to buy them was that I had bought a silicone mold from Mod Podge, and some of their glue stick type things a few weeks ago and didn't like them, but I needed something I could use in the mold.

I had also been looking at silicone molds since I bought the Mod Podge one, and had found so many beautiful ones made for baking on the internet. I did a Pinterest page of many of them here. They are gorgeous, so go look at them!

Anyway, after seeing those molds, I decided to get the MS kit, and some Wilton molds. My mother got me a couple more of the MS molds as well, but I can't have them until my birthday. :-)

I wish I had bought more of the white clay while I was there, because I have a feeling I am going to need it. Oh well, it's something to ask Santa for! I've seen people mixing it with PearlEx on the internet, and I really want to try that!

The red, yellow, blue, brown, and white clay were in the kit, along with a couple of white plastic tools, some florist tape, and some florist wire in case you want to make one of the beautiful roses in the instructions.

The small round blue molds were also in the kit. The two large blue ones are from Wilton, and I kept the photos that were with them so I could use them for future reference. Those photos are at the top of the picture. Even though some of them are quite large, I thought that they would be fun on cigar boxes. The orange ones at the top, are the Mod Podge ones.

Anyway, I'm off to play, I'll let you know how I like them!

Embossed Wreath Card

It was really difficult to get a photo of this card. One shows the detail, and the other shows the shimmer.

I used the Spellbinders 3D M-Bossabilities Rustic Wreath Folder on dark green CS, then used one of those square foam shading things with Delicata Golden Glitz to shade it.

The sentiment was done with the same ink and a JustRite stamp. The gold behind it was done with gold mirror card and a Spelllbinders tag die. I fussy cut the green paper to fit inside it.

The card was matted with gold mirror card, and gold pearls were added as accents. It looks much prettier in person.

I'm sort of depressed this year. Usually we have a big Christmas Craft show, and I count on it to make money for Christmas, but this year they aren't having it, so any Christmas cards I make that I don't send myself will have to wait until next summer before I get a chance to sell them. I've tried both eBay and Etsy, but I always spend more money selling than I actually make. I sure wish we were in a bigger area where there are lots of shows.

More flowers I made

These are some more flowers I made. Most of them are from McGill punches, but the three little roses are from Spellbinders Bitty Blossoms.

The yellow on the roses is much paler than it looks in the photo, and the greens in the leaves aren't as bright either, but I took this photo at night.

I was pretty happy with the McGill flowers, especially since it was my first try, but I think I need more practice with the Bitty Blossoms. I'm not at all happy with them. I have wanted those dies for a long time because of the beautiful flowers Marisa Job has made with them, but mine don't look at all like hers. I will practice some more though, and I'm sure they will get better! I also wish I had shaded the outside of the yellow petals on the pansy with purple. I think it would have looked more real that way. The center of the pansy and the stamen on the Calla Lilly are the ultrafine orange crush Flower Soft.

I also played around with some premade roses I got on clearance at Michaels last year. All of these were white, but I used some Brilliance stamp pads, and different brands of glitter sprays to color them. Some of the flowers were colored with more than one shade of spray. The ones which still look white have pearl shades on them so they shimmer in real life. I've found that I like buying white flowers best, because then I can color them to match my projects.

WOYWW 233

This is the day of the week where we all go snooping around peeking at each other's desks. If you want to join us, hop on over to Julia's blog, to see what it's all about.

I've been MIA for a few months while I had my shop open for the summer, but I hope I will be able to get back in the swing of things now that summer is over.

This photo was taken on Tuesday evening, since I have to pick everything up each time I finish. I was finishing up two different projects at once, so I have a strange mixture on my workdesk.

First I finished up a card that I posted Tuesday night by adding rhinestones to it. The card is on my desk, and the two blue baskets are where I keep my Rhinestones and pearls during the winter. In the summer they are sorted by color on a turn-around display thing. It's much handier that way, but it takes up too much room to bring it home for the winter.

I was also finishing up some flowers I made from McGill punches and Spellbinders Bitty Blossoms. Those are sitting on top of a container of embossing powder while they dry. All my embossing powder is in flat plastic boxes. It's easy to use this way, because you just put your card into the box and shake, but it takes up a lot of room if you have a lot of colors.

The black rectangular thing on my cutting mat is my flower embossing mat. The cup contains my embossing styluses, pens, and other things. You can also see part of my Fiskars trimmer, ATG, heat gun, scissors, dimensional tape, Really Useful Boxes, a craft knife, and my antique box, which contains the small things I use at every session.

Underneath the cutting mat is my non stick craft mat. It's on a sample wallboard paneling thingy. I find it really easy to keep it on the wallboard thing under the cutting mat. That way I don't have to put it away every time, and when I want to switch back and forth between cutting and doing messy things, I just keep my cutting mat on one side of it, and I can use both at once. Before I started doing this, I forgot about putting my project back onto the cutting mat, and I cut through the craft mat. :-( I also used to forget, and use my heat gun on the cutting mat, which warps it. Now I usually remember to put my project on the craft mat first, before embossing.

Please ignore the mess on the side of the desk. Those are boxes of supplies and things, and they aren't very neat after digging through them trying to find things!

Silver and Pearl Merry Christmas Card

I frequently save pretty tags to recycle later on cards. I usually throw them into a drawer where I keep unfinished things I wasn't happy with.

For this card, I wasn't really sure what I wanted to make, so I looked into my unfinished parts drawer, and found this tag. It was a polished silver with embossed shiny silver details. I matted it with Core'dinations white Pearl CS and silver mirror card.

Next, I embossed another piece of the pearl CS, trimmed it close to the embossing, and mounted it onto more pearl. This was matted with more silver and more pearl, and mounted onto a pearl card.

The matted Christmas motif was mounted onto the embossed part dimensionally, then silver rhinestones were added. It was fairly quick to make, and I was quite happy with the results!

Pink Roses and Creatables Card

This is another card I made a few months ago with dies from Marianne Creatables.

The design was cut from Core'dinations white pearl CS, and shaded with Brilliance Pink, then mounted onto some pink Core'dinations Gemstones CS. It was matted with gold mirror card, mounted onto a white card, and accented with roses, a bow, and pink and white rhinestones.

Lace and Gold Card

I made this card about a month ago when I got my new Spellbinders. It was done using Elegant Labels Four and Opulent Ovals. The paper is white CS and a pale gold Core'dinations Pearl CS, and all shading was done using Viva Decor Inka Gold Metallic Rub. Most of the layers were mounted with dimensional tape, and Liquid Pearl accents were added.

I photographed it twice, once to show the shimmer, and once to show the depth.

I love these elegant new Spellbinders dies. They make it so easy to create an intricate card with just a few die cuts!

Thanksgiving Blessings Card

Last September I made a card from an old JustRite stamp set I had. When one of my best customers saw it, she commissioned me to make two more cards with the other two stamps in the set. This is the second one.

The CS is a generic ivory, and metallic copper and green CS. The DP is some very old Anna Griffin CS.

The sentiment and frames were stamped with VersaMark, and embossed with gold EP, then cut with the matching JustRite dies by Spellbinders. I don't remember what color I used for the shading. All layers were outlined in gold, and some were mounted dimensionally. Green pearls were added as accents.

Elegant Angel Card

I finally got internet back again. It's been about two weeks since I could actually get a whole page to load, but now it is working again. It's still slow, but it's better than nothing!

Last year I bought this angel stamp on clearance at Michaels when we were in New York. I thought she was so cute, and would be fun to color, but since I bought the stamp right after Christmas, and I was tired of Christmas cards, I had to wait almost a whole year to make a card with her.

She was colored with a combination of Copics, Brilliance inks, and Viva Decor Inka Gold Metallic Rub, after stamping her with VersaMark and embossing her in gold.

The fame surrounding her was done with Spellbinders Elegant Labels Four, from gold mirror card. This was mounted on a piece of Core'dinations Pearl CS, which I embossed with the same die, and cut a little larger than the frame. I ran a gold ink pad around the edge of this, and mounted it onto a slightly larger card made from the same CS.

The panel she is on was cut from Labels Four, and Liquid Pearls were added as accents.

Internet problems again

Sorry I can't get around to visit. Saturday afternoon we started having internet problems again. We have been having them off and on for a few weeks, but now it's more off than on. It took over an hour to load this page to post on, and it doesn't even have many graphics on it. I absolutely hate Fairpoint. I pay for DSL every month, and can't even load a blog page, never mind watch you tube. Most people who are in areas which have cable have switched to Time Warner, but we don't have cable on our road.

Anyway, while I'm mostly without internet, I've been making flowers. I had a bunch of McGill punches, and have been playing with those. I also finally got Spellbinders Bitty Blossoms, but haven't been happy with the results. I can't wait until internet is back so I will finally be able to see tome tutorials to see what I am doing wrong. So many people have made some beautiful flowers with the Bitty Blossoms. Hopefully there are some on the internet that don't use you tube.

Luckily, I had downloaded all the McGill .pdfs a few months ago, so I can play with those. So far, I've done a pink and white lily, a purple clamatis, and a calla lily. They're in the largest size, but I think I'm going to try some in smaller sizes so they fit on cards better. I also have four of the Sizzix flower dies, and had downloaded the .pdfs for those a while back, so I can't wait to try them!

Embossed Pink Friendship Card

This card uses the Spellbinders 3D M-Bossabilities Folder Framed Labels Eighteen. I thought pink would be a very pretty color for it, and also put a smile on the face of my blog friend Jill. The embossing folder reminds me of wallpaper and wainscotting in a house. Originally I tried to use white CS and use the letterpress technique to make the bottom pink with white on the raised edges, then I was going to go over the white embossing on top, and make it white with pink embossing, but my letterpress techniques don't always work out very well. That went into a scrap drawer until I could see if I could salvage it.

For the second try, I embossed pink CS and used white ink to go over the raised portions. Next, I cut and embossed two sizes of Labels Eighteen, shaded them with white, and used a white Gellyroll pen to outline inside the die. The sentiment is from JustRite, and was stamped and embossed with white ink and EP.

The labels were mounted dimensionally, and the card was accented with pearls and a bow.